There are a few amazing systems on the marketplace for painting a countertop to possess the appearance of granite. In this article, I'll clarify the fundamental process of getting ready the tops, applying paint colors and rolling around the distinct coats.
Cleaning the Surface
Using a cleanser that functions like a degreaser is the preferred kind of item to become utilized for cleaning the countertops. Formula 409 or Dawn dish-washing liquid will work great for this stage from the project. It's important to wash "every" inch from the tops, even the skinny leading edge of the back-splashes. Additionally, you will have to eliminate any "Silicon" based caulk having a putty knife. Paint generally does not stick with "Silicon" caulking extremely nicely.
Filling the Chips
If you will find any chips within the surface area that have to be stuffed, lightly sand them first with 100 grit sandpaper, then use a two part epoxy filler to fill the gaps. Most painting methods come equipped with everything you need to paint the tops to seem like granite, even the filler. Allow it to completely dry after which sand it flush. If there's still a melancholy whenever you completed, apply a second application and re-sand the region. Paint will always follow the shape of the dip, crack or scratch. This is why you must make these broken areas flat prior to making use of the countertop granite paint.
Protecting the Surrounding Surfaces
You will have to use masking tape around the walls and cupboard areas that might be within the hazard zone for getting the granite paint on them. A thin layer of plastic taped towards the walls will shield them from any paint splatters. Be sure to make "perfectly" directly lines when masking things off. All around the sink will need to have masking tape applied as well.
Primer Application
Utilizing a roller, the primer coat is applied to the large-flat surface areas. A foam brush is used for around exactly where the backsplash meets the kitchen or rest room countertops and alongside the edges.
The good results of painting a countertop is found in allowing sufficient time for the coatings to dry. With that becoming stated, Don't get too anxious to apply the following three colors of paint. The adhesion from the primer coating is the most Essential part of the procedure.
Painting With Foam
You are going to use three various colors of paint utilizing a piece of foam which has large, medium and small holes all through it. It looks considerably like coral. Every color will be dabbed on the countertop and blended together. It is suggested to try practicing on a piece of poster-board first.
Sanding Out the Imperfections
As soon as the colors have "completely" dried, the following step will be lightly sanding any tough locations off of the surface. You might have to perform a little touch-up whenever you are finished.
Applying the Clear-Coat
The final stage of painting the countertop is making use of the clear-coats. You'll roll on one coat and allow it to dry. You'll be using a foam applicator around the difficult to obtain to locations with the roller. Roll around the 2nd coat and also you are almost finished.
Removing the Masking Tape
Just after making use of the second clear-coat, begin to remove the masking tape. It is a good thought to use a razor knife and score the line as you are removing it.
The whole procedure of painting a countertop requires about four days. As soon as you have completed, the granite paint will be totally cured in about two weeks. Throughout this time, you need to maintain the tops dry and never allow any standing water to remain on them. It's also essential to help keep them thoroughly clean by using a cloth dampened with water.
Know more about countertop paint
No comments:
Post a Comment